Save Money by Maintaining Your Digger Derrick!

It is very disappointing when a business encounters any type of digger derrick problems, especially if there is a rush to timely finish a job. This can be avoided if regularly schedule preventive maintenance is set up with a scheduled program. Proper inspections and early repairs can help avert this kind of scenario. Regular upkeep could lessen equipment down time, reduce wear-and-tear, detect potential mechanical problems, prevent unnecessary failures that affect productivity, and decrease repair costs, eventually saving both time and money for a business.

Preventive Maintenance

Many years ago, digger derrick trucks were simple machines, inexpensive to purchase and easy to repair. The rapid technological advances in commercial vehicles have made them more complex and more expensive, requiring more attention in terms of proper care. An adequate preventive maintenance program can optimize the use of the vehicle and enhance its potential to take the productivity of a company to an increased level. Included below are some of the benefits of such a program:

  • Strengthen Profits – Increased profit generation
  • Eliminate Failures – Curtailed and eliminated machine failures
  • Improve Operation – Enhanced performance of the equipment
  • Decrease Repairs – Reduced need for repairs
  • Lower Overtime – Decreased overtime to cover the production losses due to a truck’s down time
  • Step-up Safety – Increased safety
  • Advance Quality – Improved machine quality
  • Reduce Up-keep Costs – Decreased overall maintenance costs

Maintenance Compliance

Periodic maintenance is usually done to decrease machine failure and reduce long-term equipment costs. These expenses may include: interrupted work schedules; idled workers; loss of productive output; and damaged equipment. Any interruptions due to the breakdown of these vehicles may significantly affect productivity levels. Therefore, it is wise for a company to institute a scheduled preventive maintenance program.

General Inspection

Inspecting the engine regularly can ensure that it is working properly. The engine usually determines the overall mechanical status of the trucks since the engine is considered to be the heart of the vehicle. It is also imperative to check the transmission, brakes, oil, tires, hydraulic hoses, boom arm, engine fluid, coolants, and suspension unit of the device regularly.

To manage safety and decrease expenses incurred because of necessary repairs, it is important to have an expert mechanic inspect the vehicles as certain parts cannot be diagnosed just by looking at them. Having the assistance of a qualified mechanic who can diagnose and inspect the components of the vehicle will help to ensure that all systems are functional.

D.O.T. Requirements

These trucks should always conform to the maintenance requirements of the Department of Transportation (D.O.T.), of which there are two: roadside and annual. Compliance with these requirements will help to safeguard the equipment, the driver, and the owning company’s reputation as well as help in the management of overall business operating costs.

When a digger derrick encounters mechanical problems, it is necessary that it be promptly checked and any necessary repairs performed. By taking care of small issues immediately, future breakdowns may be prevented and repair costs can be minimized. Accordingly, regular maintenance and early detection of any mechanical deterioration is very important. By simply initiating a scheduled upkeep program with the help of a knowledgeable mechanic, time, energy and money can indeed be saved!

Bookmark and Share

Permeable Surfaces Helped by Vacuum Trucks!

Many seem to realize the importance of cleaning streets to reduce sediment, debris, and other pollutants from accumulating in gutters, parking lots, and roadsides that could get washed into storm drains and eventually end up in streams, lakes, and rivers. A simple solution to this problem is the installation of porous pavement to filter water into the soil. This new innovative pervious surface can significantly impact the quality of water and environmental health. In fact, this is a very unique and effective method that can be used to solve several environmental issues and support eco-sustainability.

Since the primary function of this pavement technology is to filter pollutants, it is imperative to continually clean the surface of the roads and suction up debris in order for this material to maintain its optimum level of functionality. This process is best done through the use of vacuum truck technology.

Pervious Surfaces

Pervious surfaces are known to contain eco-friendly paving materials that have the capacity to manage runoff, control certain pollutants, reduce urban heat-island effects, improve plant health, and reduce soil erosion. These are only a few of the benefits this permeable pavement can provide. In addition, the Environmental Protection Agency (EPA) strongly recommends the use of this new technology for Best Management Practices (BMP) across the United States to efficiently manage water runoff without restricting the use of available space. This is thought to replenish watershed systems.

Pervious surfaces are made using coarse aggregate, cement, water, and sand. These elements are mixed to form an interconnected system of voids to produce high permeability; this mixture allows approximately 3 to 8 gallons of water per square foot to pass through per minute. Pervious concrete has been used in several different applications; however, its primary use is for pavement materials. This permeable surface is low maintenance, attractive, and a cost-effective solution for managing water runoff that flows into treatment plants.

Surface Maintenance

It is imperative that permeable pavement receive maintenance more often than regular pavement to prevent the interconnected voids from getting blocked up with debris, grit, and dirt. This can be done by using vacuum trucks to suction up all the sediment to avoid clogging which maintains maximum functionality. It is essential to carry out a frequent, regular maintenance program because the accumulation of sediment over time can make the surface impermeable to water. Sweeping or vacuuming the surface at least bi-yearly can enhance its performance and longevity.

In addition, the use of a street vacuum sweeper is an important aspect in the removal of pollutants. This innovative and sophisticated technology has improved and made more efficient performance in terms of sucking up fine debris particles. This method assists in capturing pollutants before they can be washed out by rainwater and flow into treatment facilities. While porous pavement is a highly efficient method in managing storm water runoff, regular maintenance through vacuum truck sweeping should be performed.

Many municipalities are installing new surfaces such as pervious pavement to control water runoff during rainy seasons. This kind of sophisticated breakthrough provides many benefits, not only to the environment but also to the health and general welfare of the populace. Knowing the functions of a vacuum truck sweeper suggests that an ongoing maintenance program be used to effectively enhance and improve pervious pavement performance. With such a purpose in mind, the technology of this machine has the potential to be very beneficial to these new surfaces!

Bookmark and Share

Custom Bumpers for Trucks

The growing population is leading to more road accidents and truck damage. A custom bumper for your truck will help minimize front end damage to your truck and protect your life and your families. What is a custom bumper? It is an aftermarket bumper that replaces your stock, chrome bumper. Stock bumpers are made to absorb impact and sensor your airbags to go off in an accident. This leads to the front end of your Truck to collapse, crushing your radiator and in worst cases your entire engine.

With a custom bumper installed your truck becomes a moving tank. Aftermarket bumpers are mounted to your frame, adding additional support to the bumper. Unlike stock bumpers, custom bumpers are made of solid steel. Typically welded both inside and out for added strength. Therefore, instead of absorbing impact, they push through the impact. Leaving your truck radiator and engine intact. Most importantly, your cab becomes much safer in the even on a front end collision.

In a perfect world, we wouldn’t need to protect ourselves from other drivers and wildlife. However, life is unpredictable. There have been testimonials from customers with Ranch Hand bumpers showing the damage done to vehicles after hitting deer at high speeds. Although unfortunate to the animal, the custom bumper had virtually no damage and zero damage to the truck. If the Ranch Hand bumper had not been installed, the truck would have been totaled and the driver in the hospital.

There are many different types of custom bumpers that are available. Typically, there are three different versions including a base model, a full grille guard model and a pre runner model. The base model custom bumper looks much like a stock bumper but is much stronger like stated above. If you want a stronger truck and a mean look without adding a complete grille guard the base is the way to go. The pre runner model is similar to the base bumper but has a bullnose bar that sticks out. The pre runner bumper is great for adding additional lighting to your ride. The most protection comes from the full grille guard custom bumper. This bumper incorporates the base bumper and complete grille and headlight protection. Plus, like the pre runner model you can add auxiliary lights.

If you are really into customizing your truck, you may want to paint your bumper to match your factory paint. Most come with either a base unpainted finish or a strong black powder coat finish. A powder coat finish gives the bumper a rugged, mean look and ditches that stock chrome look. Work trucks, off-roading machines, daily driver trucks and custom trucks can all benefit from a well built front end. Obviously, a well built front end starts with a strong bumper.

Bookmark and Share